Consolidated bioprocessing of Populus using Clostridium (Ruminiclostridium) thermocellum: A case study on the impact of lignin composition and structure

Alexandru Dumitrache, Hannah Akinosho, Miguel Rodriguez, Xianzhi Meng, Chang Geun Yoo, Jace Natzke, Nancy L. Engle, Robert W. Sykes, Timothy J. Tschaplinski, Wellington Muchero, Arthur J. Ragauskas, Brian H. Davison, Steven D. Brown

Research output: Contribution to journalArticlepeer-review

54 Scopus citations

Abstract

Background: Higher ratios of syringyl-to-guaiacyl (S/G) lignin components of Populus were shown to improve sugar release by enzymatic hydrolysis using commercial blends. Cellulolytic microbes are often robust biomass hydrolyzers and may offer cost advantages; however, it is unknown whether their activity can also be significantly influenced by the ratio of different monolignol types in Populus biomass. Hydrolysis and fermentation of autoclaved, but otherwise not pretreated Populus trichocarpa by Clostridium thermocellum ATCC 27405 was compared using feedstocks that had similar carbohydrate and total lignin contents but differed in S/G ratios. Results: Populus with an S/G ratio of 2.1 was converted more rapidly and to a greater extent compared to similar biomass that had a ratio of 1.2. For either microbes or commercial enzymes, an approximate 50 % relative difference in total solids solubilization was measured for both biomasses, which suggests that the differences and limitations in the microbial breakdown of lignocellulose may be largely from the enzymatic hydrolytic process. Surprisingly, the reduction in glucan content per gram solid in the residual microbially processed biomass was similar (17-18 %) irrespective of S/G ratio, pointing to a similar mechanism of solubilization that proceeded at different rates. Fermentation metabolome testing did not reveal the release of known biomass-derived alcohol and aldehyde inhibitors that could explain observed differences in microbial hydrolytic activity. Biomass-derived p-hydroxybenzoic acid was up to nine-fold higher in low S/G ratio biomass fermentations, but was not found to be inhibitory in subsequent test fermentations. Cellulose crystallinity and degree of polymerization did not vary between Populus lines and had minor changes after fermentation. However, lignin molecular weights and cellulose accessibility determined by Simons' staining were positively correlated to the S/G content. Conclusions: Higher S/G ratios in Populus biomass lead to longer and more linear lignin chains and greater access to surface cellulosic content by microbe-bound enzymatic complexes. Substrate access limitation is suggested as a primary bottleneck in solubilization of minimally processed Populus, which has important implications for microbial deconstruction of lignocellulose biomass. Our findings will allow others to examine different Populus lines and to test if similar observations are possible for other plant species.

Original languageEnglish
Article number31
JournalBiotechnology for Biofuels
Volume9
Issue number1
DOIs
StatePublished - Feb 4 2016

Funding

accordance with the DOE Public Access Plan (http://energy.gov/downloads/ doe-public-access-plan). This research was funded by the Bioenergy Science Center (BESC) which is a U.S. Department of Energy Bioenergy Research Center supported by the Office of Biological and Environmental Research in the DOE Office of Science. ORNL is managed by UT-Battelle, LLC, Oak Ridge, TN, USA, for the DOE under contract DE-AC05-00OR22725.

FundersFunder number
BESC
BioEnergy Science Center
U.S. Department of Energy Bioenergy Research Center
U.S. Department of EnergyDE-AC05-00OR22725
Office of Science
Biological and Environmental Research
Oak Ridge National Laboratory

    Keywords

    • Clostridium thermocellum
    • Consolidated bioprocessing
    • Guaiacyl
    • Lignin
    • Molecular weight
    • Populus
    • S/G ratio
    • Syringyl

    Fingerprint

    Dive into the research topics of 'Consolidated bioprocessing of Populus using Clostridium (Ruminiclostridium) thermocellum: A case study on the impact of lignin composition and structure'. Together they form a unique fingerprint.

    Cite this