Skip to main navigation Skip to search Skip to main content

Characterization of nonlinear ultrasonic waves behavior while interacting with poor interlayer bonds in large-scale additive manufactured materials

Research output: Contribution to journalArticlepeer-review

18 Scopus citations

Abstract

Over the past decades, researchers have developed several nonlinear ultrasonic techniques for quality control of materials commonly used in different applications. Owing to the superior sensitivity of nonlinear ultrasound waves to small defects such as micro-cracks, their applicability in different nondestructive testing (NDT) problems has been investigated in numerous studies. These studies utilize frequency domain analysis to detect the generation of higher harmonics because of the formation of defects in the inspected medium. Frequency domain analysis based on the Fourier transform is a significant approach used in linear systems; however, it may not perform adequately on nonlinear systems. Hence, studies on nonlinear dynamics and physics consider analyzing systems' behavior in the phase-space domain. In contrast to the frequency domain analysis, which can result in information loss, analysis in the phase-space domain retains all the information regarding a system's states. In this study, the nonlinearities induced by poor interlayer bonding in polymer-based additive manufactured parts in the phase-space domain are investigated. It is convenient to characterize the nonlinearity in the phase-space domain because it provides a geometrical representation of a system's states. Two types of low quality interlayer bond are considered. The first type is simulated artificially while the second type is manufactured by reducing the bond quality during the printing process. The analysis verified that the received ultrasonic signals exhibit classical nonlinear behavior in the phase-space domain while interacting with simulated poor interlayer bonds. In addition, the results showed that the behavior of ultrasonic waves is amplitude-dependent and evolves into models that have not been previously reported. Furthermore, Largest Lyapunov Exponent (LLE) is used to quantify the behavior of nonlinear ultrasonic waves while interacting with poor interlayer bonds. Using LLE, it was observed that the divergence rate of the phase-space trajectories depends on the amplitude of the excitation. This observation quantitatively proves that nonlinear behavior of ultrasound while interacting with poor interlayer bonds can be amplitude-dependent. The results of both simulated and inherent poor interlayer bond cases showed that LLE can be used as a reliable quantitative damage-sensitive feature to detect and potentially characterize weak bonds, which are difficult to detect using conventional approaches. In addition, the reported results in the phase-space domain provide a basis for proposing a new mathematical model for ultrasonic waves interacting with poor interlayer bonds.

Original languageEnglish
Article number102602
JournalNDT and E International
Volume127
DOIs
StatePublished - Apr 2022

Funding

Notice of Copyright This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan ( http://energy.gov/downloads/doe-public-access-plan ). Notice of Copyright This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy.gov/downloads/doe-public-access-plan).Research was sponsored in part by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advance Manufacturing Office, under contract DE-AC05-00OR22725 with UT-Battelle, LLC. Large scale AM machine used in this research was sponsored by Cincinnati Inc., OH, USA. Feedstock materials used in this work were provided by Techmer PM. TN, USA. We also gratefully acknowledge the funding support from the Department of Energy/National Nuclear Security Agency (Grant DE-NA0003987). Research was sponsored in part by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy , Advance Manufacturing Office, under contract DE-AC05-00OR22725 with UT-Battelle, LLC. Large scale AM machine used in this research was sponsored by Cincinnati Inc. , OH, USA. Feedstock materials used in this work were provided by Techmer PM., TN, USA. We also gratefully acknowledge the funding support from the Department of Energy/National Nuclear Security Agency (Grant DE-NA0003987 ).

Keywords

  • Additive manufacturing
  • Classic nonlinearity
  • Contact acoustic nonlinearity
  • Interlayer bonding
  • Phase-space

Fingerprint

Dive into the research topics of 'Characterization of nonlinear ultrasonic waves behavior while interacting with poor interlayer bonds in large-scale additive manufactured materials'. Together they form a unique fingerprint.

Cite this