CFD analysis of particle transport in axi-symmetric tube flows under the influence of thermophoretic force

Mehdi Abarham, Parsa Zamankhan, John W. Hoard, Dan Styles, C. Scott Sluder, John M.E. Storey, Michael J. Lance, Dennis Assanis

Research output: Contribution to journalArticlepeer-review

27 Scopus citations

Abstract

In this study, we developed two frameworks to investigate the thermophoretic particulate deposition in non-isothermal tube flows conveying particles ranging from 10 to 300 nm; a one dimensional model where the variables are assumed to be uniform in each cross section perpendicular to the tube axis and an axi-symmetric model where the aforementioned assumption is relaxed. In the one dimensional model, the rate of mass deposition along the inner surface of the tube is computed based on the local thermophoretic velocity of the particulate phase at the wall. This velocity is proportional to the radial gradient of the temperature at the wall and is calculated via some empirical correlations for heat transfer in tube flows. In the axi-symmetric model, the rate of deposition is computed through the Fick's law after solving the species transport equation for the solid phase. We included the formation of the soot layer through moving the gas-solid interface in both models. The tube effectiveness (the ratio of actual heat transfer to the maximum possible heat transfer) decreases due to the formation of the layer. Model outputs including deposited mass along the tube wall and the tube effectiveness drop have been compared against experiments. While the computed results through both models agree with the trend of experimental data, the axi-symmetric results are closer to the experiments in most cases. The calculated deposited mass is smaller (and closer to experiments) for the axi-symmetric model compared to the one dimensional model in all cases. This indicates that the axi-symmetric model estimates the deposited mass more accurately.

Original languageEnglish
Pages (from-to)94-105
Number of pages12
JournalInternational Journal of Heat and Mass Transfer
Volume61
Issue number1
DOIs
StatePublished - 2013

Keywords

  • Axi-symmetric
  • CFD
  • Dynamic mesh
  • Particle-laden flow
  • Thermophoresis

Fingerprint

Dive into the research topics of 'CFD analysis of particle transport in axi-symmetric tube flows under the influence of thermophoretic force'. Together they form a unique fingerprint.

Cite this