An experimental study of axial conduction through a thermosyphon pipe wall

Wei Guo, Darin W. Nutter

Research output: Contribution to journalArticlepeer-review

17 Scopus citations

Abstract

The effect of the axial conduction through the pipe wall on the performance of a thermosyphon was experimentally investigated in this study. Two 2-phase closed thermosyphons were tested; each had the same dimensions, materials and partially filled with R134a. The only difference between them was that one had a thermal break within the adiabatic section that resisted axial conduction between the evaporator and the condenser sections. The thermosyphons were heated by a constant-temperature hot bath and cooled by water via a concentric heat exchanger. The experiments were performed for different bath temperatures and different fill ratios. It was found that the axial conduction through the pipe wall caused an increase in the overall heat transfer coefficient, evaporation heat transfer coefficient and condensation heat transfer coefficient of the thermosyphon. However, the fraction of heat transfer associated with axial conduction decreased as the heat flux increased. For small heat flux (Tb = 30 °C), the increment of the evaporation and condensation heat transfer coefficient contributed by axial conduction reached 100% and 25%, respectively. For high heat flux (Tb = 60 °C), the increment was negligible (less than 1%).

Original languageEnglish
Pages (from-to)3536-3541
Number of pages6
JournalApplied Thermal Engineering
Volume29
Issue number17-18
DOIs
StatePublished - Dec 2009
Externally publishedYes

Keywords

  • Fill ratio
  • Heat transfer coefficient
  • R134a
  • Thermal break
  • Thermosyphon

Fingerprint

Dive into the research topics of 'An experimental study of axial conduction through a thermosyphon pipe wall'. Together they form a unique fingerprint.

Cite this