An Automated System for Temperature Dependent Mechanical Property Measurements

Yarom Polsky; Charles Ume

doi:10.1115/IMECE1996-0784

An Automated System for Temperature Dependent Mechanical Property Measurements

Yarom Polsky, Charles Ume

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

An automated system capable of measuring temperature dependent mechanical properties based on extensional strain has been developed. The system uses either the electrical resistance strain gage technique or a laser extensometer device in conjunction with user programmable thermal cycling, load cycling and data acquisition. An IBM-compatible 486 computer with commercially available software is used to regulate the test cycling and data acquisition. This system is being used to characterize the mechanical properties of printed wiring board (PWB) core materials over manufacturing temperature ranges. This paper will discuss the integration of system components and the system capabilities. Experimental results for 1080 FR-4 Prepreg and copper-foil clad laminate will be presented as well as a comparison of the contact and non-contact methods used for strain measurement.

Original language	English
Title of host publication	Manufacturing Science and Engineering
Publisher	American Society of Mechanical Engineers (ASME)
Pages	141-151
Number of pages	11
ISBN (Electronic)	9780791815458
DOIs	https://doi.org/10.1115/IMECE1996-0784
State	Published - 1996
Externally published	Yes
Event	ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996 - Atlanta, United States Duration: Nov 17 1996 → Nov 22 1996

Publication series

Name	ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
Volume	1996-T

Conference

Conference	ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996
Country/Territory	United States
City	Atlanta
Period	11/17/96 → 11/22/96

Funding

This research would not have been possible without the generous sponsorship of the Manufacturing Research Center (MaRC) Industrial Advisory Board Members. The authors would like to express our appreciation to the following companies that support or supported the Georgia Tech MaRC: AT&T, DEC, Ford, IBM, MICOM, and Motorola.

Access to Document

10.1115/IMECE1996-0784

Cite this

@inproceedings{30d94b707f9c44d9bb823b76664b3c33,

title = "An Automated System for Temperature Dependent Mechanical Property Measurements",

abstract = "An automated system capable of measuring temperature dependent mechanical properties based on extensional strain has been developed. The system uses either the electrical resistance strain gage technique or a laser extensometer device in conjunction with user programmable thermal cycling, load cycling and data acquisition. An IBM-compatible 486 computer with commercially available software is used to regulate the test cycling and data acquisition. This system is being used to characterize the mechanical properties of printed wiring board (PWB) core materials over manufacturing temperature ranges. This paper will discuss the integration of system components and the system capabilities. Experimental results for 1080 FR-4 Prepreg and copper-foil clad laminate will be presented as well as a comparison of the contact and non-contact methods used for strain measurement.",

author = "Yarom Polsky and Charles Ume",

note = "Publisher Copyright: {\textcopyright} 1996 American Society of Mechanical Engineers (ASME). All rights reserved.; ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996 ; Conference date: 17-11-1996 Through 22-11-1996",

year = "1996",

doi = "10.1115/IMECE1996-0784",

language = "English",

series = "ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)",

publisher = "American Society of Mechanical Engineers (ASME)",

pages = "141--151",

booktitle = "Manufacturing Science and Engineering",

}

Polsky, Y & Ume, C 1996, An Automated System for Temperature Dependent Mechanical Property Measurements. in Manufacturing Science and Engineering. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 1996-T, American Society of Mechanical Engineers (ASME), pp. 141-151, ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996, Atlanta, United States, 11/17/96. https://doi.org/10.1115/IMECE1996-0784

An Automated System for Temperature Dependent Mechanical Property Measurements. / Polsky, Yarom; Ume, Charles.
Manufacturing Science and Engineering. American Society of Mechanical Engineers (ASME), 1996. p. 141-151 (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); Vol. 1996-T).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - An Automated System for Temperature Dependent Mechanical Property Measurements

AU - Polsky, Yarom

AU - Ume, Charles

PY - 1996

Y1 - 1996

N2 - An automated system capable of measuring temperature dependent mechanical properties based on extensional strain has been developed. The system uses either the electrical resistance strain gage technique or a laser extensometer device in conjunction with user programmable thermal cycling, load cycling and data acquisition. An IBM-compatible 486 computer with commercially available software is used to regulate the test cycling and data acquisition. This system is being used to characterize the mechanical properties of printed wiring board (PWB) core materials over manufacturing temperature ranges. This paper will discuss the integration of system components and the system capabilities. Experimental results for 1080 FR-4 Prepreg and copper-foil clad laminate will be presented as well as a comparison of the contact and non-contact methods used for strain measurement.

AB - An automated system capable of measuring temperature dependent mechanical properties based on extensional strain has been developed. The system uses either the electrical resistance strain gage technique or a laser extensometer device in conjunction with user programmable thermal cycling, load cycling and data acquisition. An IBM-compatible 486 computer with commercially available software is used to regulate the test cycling and data acquisition. This system is being used to characterize the mechanical properties of printed wiring board (PWB) core materials over manufacturing temperature ranges. This paper will discuss the integration of system components and the system capabilities. Experimental results for 1080 FR-4 Prepreg and copper-foil clad laminate will be presented as well as a comparison of the contact and non-contact methods used for strain measurement.

UR - http://www.scopus.com/inward/record.url?scp=85169161239&partnerID=8YFLogxK

U2 - 10.1115/IMECE1996-0784

DO - 10.1115/IMECE1996-0784

M3 - Conference contribution

AN - SCOPUS:85169161239

T3 - ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

SP - 141

EP - 151

BT - Manufacturing Science and Engineering

PB - American Society of Mechanical Engineers (ASME)

T2 - ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996

Y2 - 17 November 1996 through 22 November 1996

ER -

An Automated System for Temperature Dependent Mechanical Property Measurements

Abstract

Publication series

Conference

Funding

Access to Document

Other files and links

Fingerprint

Cite this