Additively Manufactured Power Poles

Brian Post; Halil Tekinalp; Alex Roschli; Peter Wang; Celeste Atkins

doi:10.2172/1778089

Additively Manufactured Power Poles

Brian Post
, Halil Tekinalp
, Alex Roschli
, Peter Wang
, Celeste Atkins

Research output: Other contribution › Technical Report

Abstract

The objective of this project was to explore the utility of native grown biomaterials for the portable production of power poles. In this Phase 1 project, activities were broken into two tasks: 1) baseline efforts to show feasibility of printed biomaterial power poles and 2) produce a conceptual design of portable pole production. The results were very promising, showing sufficient mechanical properties from printed biomaterials as well as conceptual designs for, and successful demonstration of, printed power poles.

Original language	English
Place of Publication	United States
DOIs	https://doi.org/10.2172/1778089
State	Published - 2021

Keywords

42 ENGINEERING

Access to Document

10.2172/1778089

Cite this

@misc{36e082c6915b4ad4ab930c0ea8404282,

title = "Additively Manufactured Power Poles",

abstract = "The objective of this project was to explore the utility of native grown biomaterials for the portable production of power poles. In this Phase 1 project, activities were broken into two tasks: 1) baseline efforts to show feasibility of printed biomaterial power poles and 2) produce a conceptual design of portable pole production. The results were very promising, showing sufficient mechanical properties from printed biomaterials as well as conceptual designs for, and successful demonstration of, printed power poles.",

keywords = "42 ENGINEERING",

author = "Brian Post and Halil Tekinalp and Alex Roschli and Peter Wang and Celeste Atkins",

year = "2021",

doi = "10.2172/1778089",

language = "English",

type = "Other",

}

TY - GEN

T1 - Additively Manufactured Power Poles

AU - Post, Brian

AU - Tekinalp, Halil

AU - Roschli, Alex

AU - Wang, Peter

AU - Atkins, Celeste

PY - 2021

Y1 - 2021

N2 - The objective of this project was to explore the utility of native grown biomaterials for the portable production of power poles. In this Phase 1 project, activities were broken into two tasks: 1) baseline efforts to show feasibility of printed biomaterial power poles and 2) produce a conceptual design of portable pole production. The results were very promising, showing sufficient mechanical properties from printed biomaterials as well as conceptual designs for, and successful demonstration of, printed power poles.

AB - The objective of this project was to explore the utility of native grown biomaterials for the portable production of power poles. In this Phase 1 project, activities were broken into two tasks: 1) baseline efforts to show feasibility of printed biomaterial power poles and 2) produce a conceptual design of portable pole production. The results were very promising, showing sufficient mechanical properties from printed biomaterials as well as conceptual designs for, and successful demonstration of, printed power poles.

KW - 42 ENGINEERING

U2 - 10.2172/1778089

DO - 10.2172/1778089

M3 - Technical Report

CY - United States

ER -