Abstract
In recent years, organic-inorganic hybrid perovskite solar cells have become a research hotspot in the photovoltaic field because of their excellent power conversion efficiency. However, this hybrid perovskite material's intrinsic instability and the harsh preparation environment limit its further commercial application. All-inorganic CsPbBr3 perovskite materials have attracted much attention because of their good stability, low cost and can be prepared in an atmospheric environment, showing great application potential. The controllable preparation and growth kinetics of CsPbBr3 materials need to be further studied, and the conversion efficiency of photovoltaic devices is still low. Considering the instability caused by traditional organic hole transport materials and their high preparation cost, this work focuses on the systematical studies of CsPbBr3 all-inorganic perovskite cells without a hole transport layer. Growth kinetics material of CsPbBr3 is controlled by adding 2-phenylethylamine bromide to precursor solution. The main research contents and results are described as follows. Based on multi-step spin-coating preparation of CsPbBr3 perovskite films, the perovskite cell preparation method is studied, and the critical process parameters including the spin-coating PbBr2, amount and number of spin-coating of CsBr, substrate preheating temperature, and the annealing temperature, are optimized. The optimization tests show that the optimal spin-coating of CsBr is obtained by being optimized five times and the spin-coating PbBr2 is conducted in the atmospheric environment. The optimal preheating temperature of the substrate is 80 ℃, and the optimal annealing temperature is 100 ℃. The perovskite films prepared under this condition are compact, each with a continuous high phase purity and good crystallization performance. The PbBr2 in DMF is first adopted and the 2-phenylethylamine bromide (PEABr) solution is added to regulate the CsPbBr3 crystalline quality of the film. The effects of PEABr on the perovskite crystallization process and device performance are systematically investigated. The results show that the introduction of PEABr can effectively optimize the CsPbBr3. The crystalline properties of the two-dimensional perovskite materials can improve the grain boundaries and improve their transport properties. The prepared perovskite solar cell with PEABr shows the highest power conversion efficiency of 8.25%, and it can maintain the efficiency of more than 90% when being stored for 1500 h under the condition of no encapsulation. Finally, stable, efficient and low-cost all-inorganic CsPbBr3 solar cells without a hole layer are obtained.
Translated title of the contribution | Efficient and stable carbon-based CsPbBr3 solar cells added with PEABr additive |
---|---|
Original language | Chinese (Traditional) |
Article number | 028101 |
Journal | Wuli Xuebao/Acta Physica Sinica |
Volume | 71 |
Issue number | 2 |
DOIs | |
State | Published - Jan 20 2022 |
Externally published | Yes |
Funding
* Project supported by the Open Fund Project of Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences (Grant No. KLSMS-1901) and the National Natural Science Foundation of China (Grant No. 21875223). # These authors contributed equally. † Corresponding author. E-mail: [email protected] ‡ Corresponding author. E-mail: [email protected]
Keywords
- CsPbBr
- Multi-step spin-coating method
- PEABr
- Perovskite solar cells
- Process optimization