No photo of Edgar Lara-Curzio

View Scopus Profile

Edgar Lara-Curzio

 https://orcid.org/0000-0003-4546-5701
Calculated based on number of publications stored in Pure and citations from Scopus
1991 …2024

Research activity per year

Filter
Conference contribution

Search results

  • 2019

    CHARACTERIZATION OF NI-BASED ALLOYS FOR ADVANCED ULTRA-SUPERCRITICAL POWER PLANTS

    Chen, X., Tortorelli, P., Shyam, A., Santella, M., Dryepondt, S., Unocic, K. A., Lara-Curzio, E. & Maziasz, P., 2019, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials. Shingledecker, J. & Takeyama, M. (eds.). ASM International, p. 580-591 12 p. (Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations
  • 2015

    Improved mechanical properties of polylactide/cellulose nanofibrils composites via interfacial engineering

    Lu, Y., Cueva, M. C., Lara-Curzio, E. & Ozcan, S., 2015, TAPPI International Conference on Nanotechnology for Renewable Materials 2015. TAPPI Press, p. 702-710 9 p. (TAPPI International Conference on Nanotechnology for Renewable Materials 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2014

    Comparison of probabilistic failure analysis for hybrid wound composite ceramic assembly tested by various methods

    Hemrick, J. G. & Lara-Curzio, E., 2014, Ceramic Materials for Energy Applications III - A Collection of Papers Presented at the 37th International Conference on Advanced Ceramics and Composites, ICACC 2013. 9 ed. p. 95-105 11 p. (Ceramic Engineering and Science Proceedings; vol. 34, no. 9).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Evaluation of ash particle rebounds in a simulated gas turbine environment

    Lawrence, M. J., Whitaker, S. M., Bons, J. P., Villalpando, M. R., Garcia, T. P. & Lara-Curzio, E., 2014, 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014. American Institute of Aeronautics and Astronautics Inc., (52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Evaluation of ash particle rebounds in a simulated gas turbine environment

    Lawrence, M. J., Whitaker, S. M., Bons, J. P., Villalpando, M. R., Garcia, T. P. & Lara-Curzio, E., 2014, 52nd Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., p. 1-16 16 p. (52nd Aerospace Sciences Meeting).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2013

    Comparison of elastic moduli of porous cordierite by flexure and dynamic test methods

    Stafford, R. J., Golovin, K. B., Dickinson, A., Watkins, T. R., Shyam, A. & Lara-Curzio, E., 2013, Advances in Bioceramics and Porous Ceramics V - A Collection of Papers Presented at the 36th International Conference on Advanced Ceramics and Composites, ICACC 2012. 6 ed. p. 197-203 7 p. (Ceramic Engineering and Science Proceedings; vol. 33, no. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2010

    Comparative study of tensile properties of uni-directional single-tow sic-matrix composites reinforced with various near-stoichiometric SiC fibers

    Ozawa, K., Katoh, Y., Lara-Curzio, E., Snead, L. L. & Nozawa, T., 2010, Mechanical Properties and Performance of Engineering Ceramics and Composites V - A Collection of Papers Presented at the 34th International Conference on Advanced Ceramics and Composites, ICACC'10. 2 ed. p. 207-220 14 p. (Ceramic Engineering and Science Proceedings; vol. 31, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Long-term temperature gradient stress relaxation testing and modeling of ceramic insulation materials

    Hemrick, J. G., Lara-Curzio, E. & King, J. F., 2010, Mechanical Properties and Performance of Engineering Ceramics and Composites IV - A Collection of Papers Presented at the 33rd International Conference on Advanced Ceramics and Composites. 2 ed. p. 83-90 8 p. (Ceramic Engineering and Science Proceedings; vol. 30, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Mechanical properties of cathode-interconnect interfaces in planar SOFCs

    Wang, Y., Armstrong, B. L., Trejo, R. M., Bai, J., Watkins, T. R. & Lara-Curzio, E., 2010, Advances in Solid Oxide Fuel Cells V - A Collection of Papers Presented at the 33rd International Conference on Advanced Ceramics and Composites. 4 ed. p. 221-229 9 p. (Ceramic Engineering and Science Proceedings; vol. 30, no. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The influence of nanosize carbon concentration on mechanical properties of RBSiC

    Da Silva, C. E. R., Trejo, R., Shim, S., Lara-Curzio, E. & Costa, C. A., 2010, Mechanical Properties and Performance of Engineering Ceramics and Composites V - A Collection of Papers Presented at the 34th International Conference on Advanced Ceramics and Composites, ICACC'10. 2 ed. p. 87-95 9 p. (Ceramic Engineering and Science Proceedings; vol. 31, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2009

    Chemical and mechanical analysis of HDIS residues using auger electron spectroscopy and nanoindentation

    Kadavanich, A. V., Shim, S. H., Meyer, H. M., Savas, S. E. & Lara-Curzio, E., 2009, Ultra Clean Processing of Semiconductor Surfaces IX: UCPSS 2008. Trans Tech Publications Ltd, p. 261-264 4 p. (Solid State Phenomena; vol. 145-146).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Effect of flow rate, nitrogen precursor and diluent on Si2N 2O deposition by HYSYCVD

    Leal-Cruz, A. L., Pech-Canul, M. I., Lara-Curzio, E., Trejo, R. M. & Peascoe, R., 2009, Processing and Properties of Advanced Ceramics and Composites- A Collection of Papers Presented at the 2008 Materials Science and Technology Conference, MS and T'08. p. 35-42 8 p. (Ceramic Transactions; vol. 203).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Microstructural and mechanical characterization of a hybrid oxide CMC combustor liner after 25,000-hour engine test

    More, K. L., Walker, L. R., Wang, Y., Lara-Curzio, E., Brummett, T. M., Van Roode, M., Price, J. R., Szweda, A. & Merrill, G., 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. p. 255-263 9 p. (Proceedings of the ASME Turbo Expo; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    11 Scopus citations
  • 2008

    Effective lifetime estimate of crimped powerline splice connector operated at high temperature

    Wang, J. J. A., Lara-Curzio, E., King, T., An, K. & Hubbard, C., 2008, ASME 2008 Pressure Vessels and Piping Conference, PVP2008. PARTS A AND B ed. p. 139-143 5 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Tensile properties of advanced SiC/SiC composites for nuclear control rod applications

    Nozawa, T., Lara-Curzio, E., Katoh, Y. & Shinavski, R. J., 2008, Mechanical Properties and Performance of Engineering Ceramics and Composites III - A Collection of Papers Presented at the 31st International Conference on Advanced Ceramics and Composites. 2 ed. p. 223-234 12 p. (Ceramic Engineering and Science Proceedings; vol. 28, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    6 Scopus citations
  • 2007

    Replication of metal-based microscale structures

    Jiang, J., Meng, W. J., Sinclair, G. B., Stevens, C. O. & Lara-Curzio, E., 2007, SYNCHROTRON RADIATION INSTRUMENTATION: Ninth International Conference on Synchrotron Radiation Instrumentation. p. 1451-1455 5 p. (AIP Conference Proceedings; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    7 Scopus citations

  • The integrity of ACSR full tension splice connector at higher operation temperature

    Wang, J. J. A., Lara-Curzio, E., King, T., Graziano, J. & Chan, J., 2007, 2007 IEEE Power Engineering Society General Meeting, PES. 4275521. (2007 IEEE Power Engineering Society General Meeting, PES).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2006

    (GenIV) next generation nuclear power and requirements for standards, codes and data bases for ceramic matrix composites

    Jenkins, M. G., Lara-Curzio, E. & Windes, W. E., 2006, Ceramics in Nuclear and Alternative Energy Applications - A Collection of Papers Presented at the 30th International Conference on Advanced Ceramics and Composites. 5 ed. p. 3-10 8 p. (Ceramic Engineering and Science Proceedings; vol. 27, no. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    8 Scopus citations

  • Comparison of recuperator alloy degradation in laboratory and engine testing

    Pint, B. A., More, K. L., Trejo, R. & Lara-Curzio, E., 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 217-224 8 p. (Proceedings of the ASME Turbo Expo; vol. 5 PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations

  • Creep strength and microstructure of AL20-25+Nb alloy sheets and foils for advanced microturbine recuperators

    Maziasz, P. J., Shingledecker, J. P., Evans, N. D., Yamamoto, Y., More, K. L., Trejo, R., Lara-Curzio, E. & Stinner, C. P., 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 225-236 12 p. (Proceedings of the ASME Turbo Expo; vol. 5 PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Effect of Sr additions on the microstructure and mechanical properties of Mg-Al-Ca alloys

    Suzuki, A., Saddock, N. D., Riester, L., Lara-Curzio, E., Jones, J. W. & Pollock, T. M., 2006, Magnesium Technology. p. 523-528 6 p. (Magnesium Technology; vol. 2006).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Effect of thermal cycling and thermal aging on the mechanical properties of, and residual stresses in, Ni-YSZ/YSZ bi-layers

    Lara-Curzio, E., Radovic, M., Trejo, R. M., Cofer, C., Watkins, T. R. & More, K. L., 2006, Advances in Solid Oxide Fuel Cells II - A Collection of Papers Presented at the 30th International Conference on Advanced Ceramics and Composites. 4 ed. p. 383-391 9 p. (Ceramic Engineering and Science Proceedings; vol. 27, no. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    10 Scopus citations

  • Fracture toughness and slow crack growth behavior of Ni-YSZ and YSZ as a function of porosity and temperature

    Radovic, M., Lara-Curzio, E. & Nelson, G., 2006, Advances in Solid Oxide Fuel Cells II - A Collection of Papers Presented at the 30th International Conference on Advanced Ceramics and Composites. 4 ed. p. 373-381 9 p. (Ceramic Engineering and Science Proceedings; vol. 27, no. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    12 Scopus citations

  • Fracture toughness of porous cordierite

    Shyam, A., Lara-Curzio, E., Lin, H. T. & Parten, R. J., 2006, Mechanical Properties and Performance of Engineering Ceramics and Composites II - A Collection of Papers Presented at the 30th International Conference on Advanced Ceramics and Composites. 2 ed. p. 75-81 7 p. (Ceramic Engineering and Science Proceedings; vol. 27, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Fracture toughness of thin plates by the double-torsion test method

    Salem, J. A., Radovic, M., Lara-Curzio, E. & Nelson, G., 2006, Mechanical Properties and Performance of Engineering Ceramics and Composites II - A Collection of Papers Presented at the 30th International Conference on Advanced Ceramics and Composites. 2 ed. p. 63-73 11 p. (Ceramic Engineering and Science Proceedings; vol. 27, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    11 Scopus citations

  • Refractory testing and evaluation at Oak Ridge National Laboratory for black liquor gasifier applications

    Hemrick, J. G., Kaiser, I. R., Peascoe, R. A., Hubbard, C. R. & Lara-Curzio, E., 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 954-958 5 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Residual stress evaluation within a crimped splice connector assembly

    Wang, J. J. A., An, K., Lara-Curzio, E., Hubbard, C., King, T., Graziano, J. A. & Chan, J., 2006, Electrical Transmission Line and Substation Structures: Structural Reliability in a Changing World - Proceedings of the 2006 Electrical Transmission Conference. p. 391-404 14 p. (Electrical Transmission Line and Substation Structures: Structural Reliability in a Changing World - Proceedings of the 2006 Electrical Transmission Conference; vol. 218).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermophysical properties of YSZ and Ni-YSZ as a function of temperature and porosity

    Radovíc, M., Lara-Curzio, E., Trejo, R. M., Wang, H. & Porter, W. D., 2006, Advances in Solid Oxide Fuel Cells II - A Collection of Papers Presented at the 30th International Conference on Advanced Ceramics and Composites. 4 ed. p. 79-85 7 p. (Ceramic Engineering and Science Proceedings; vol. 27, no. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    50 Scopus citations
  • 2005

    Mechanical and thermal properties of non-aqueous gel-cast celsian and sialon ceramic materials

    Vaidyanathan, R., Phillips, T., Halloran, J., Reister, L., Porter, W., Radovic, M. & Lara-Curzio, E., 2005, Mechanical Properties and Performance of Engineering Ceramics and Composites. A Collection of Papers Presented at the 29th International Conference on Advanced Ceramics and Composites. 2 ed. American Ceramic Society, p. 253-263 11 p. (Ceramic Engineering and Science Proceedings; vol. 26, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Microstructural characteristics and mechanical properties of friction skew-stir welded lap joints in 5083-0 aluminium

    Cantin, G. M. D., David, S. A., Lara-Curzio, E., Babu, S. S. & Thomas, W. M., 2005, Trends in Welding Research - Proceedings of the 7th International Conference. p. 185-190 6 p. (ASM Proceedings of the International Conference: Trends in Welding Research; vol. 2005).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    12 Scopus citations
  • 2003

    Fracture behavior of SiC-based, clay-bonded hot gas filters

    Pastila, P., Nikkilä, A. P., Mäntylä, T. & Lara-Curzio, E., 2003, Ceramic Engineering and Science Proceedings. 3 ed. American Ceramic Society, p. 171-176 6 p. (Ceramic Engineering and Science Proceedings; vol. 24, no. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Tensile evaluation of ceramic foam ligaments

    Verdugo, R. A., Ochoa, O. O. & Lara-Curzio, E., 2003, Ceramic Engineering and Science Proceedings. 3 ed. American Ceramic Society, p. 153-158 6 p. (Ceramic Engineering and Science Proceedings; vol. 24, no. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2002

    Mechanical properties of injection molded NdFeB permanent magnets

    Garrell, M. G., Ma, B. M., Lara-Curzio, E., Shih, A. J. & Scattergood, R. O., 2002, INTERMAG Europe 2002 - IEEE International Magnetics Conference. Fidler, J., Hillebrands, B., Ross, C., Weller, D., Folks, L., Hill, E., Vazquez Villalabeitia, M., Bain, J. A., De Boeck, J. & Wood, R. (eds.). Institute of Electrical and Electronics Engineers Inc., 1000823. (INTERMAG Europe 2002 - IEEE International Magnetics Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2001

    Effect of notches, specimen size, and fiber orientation on the monotonic tensile behavior of composites at ambient and elevated temperatures

    Antti, M. L. & Lara-Curzio, E., 2001, Ceramic Engineering and Science Proceedings. 3 ed. American Ceramic Society, p. 643-650 8 p. (Ceramic Engineering and Science Proceedings; vol. 22, no. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations

  • The effect of diameter variation along a fiber on the determination of fiber strengths and the parameters of the distribution

    Lara-Curzio, E. & Garcia, D., 2001, Ceramic Engineering and Science Proceedings. 3 ed. American Ceramic Society, p. 363-370 8 p. (Ceramic Engineering and Science Proceedings; vol. 22, no. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations
  • 2000

    Design, fabrication, and testing of ceramic joints for high temperature SiC/SiC composites

    Singh, M. & Lara-Curzio, E., 2000, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    2 Scopus citations
  • 1999

    Iron-aluminide filters for hot-gas cleanup

    Tortorelli, P. F., McKamey, C. G., Lara-Curzio, E. & Judkins, R. R., 1999, Coal, Biomass and Alternative Fuels; Combustion and Fuels; Oil and Gas Applications; Cycle Innovations. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations
  • 1997

    Oxidation induced stress-rupture of fiber bundles

    Lara-Curzio, E., 1997, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access